Google




Step-by-Step Instructions

  1. Double click on My Computer from your desktop.



  2. Double click on Dial-Up Networking.



  3. Open Make New Connection.


  4. Enter East Texas Rural Net in the first blank space. Your modem device will be displayed in the lower box. There should be no need to change this information. Press the NEXT button when done.



  5. Press the Tab key to leave the Area Code blank. Enter either the local access number you have been provided or 1-866-663-3679 in the Telephone Number box. (There are no additional charges for using the Toll-Free access number) Press NEXT.



  6. Press the FINISH button.

  7. Right click on your new connection then click on Properties. The icon should be labeled as “East Texas Rural Net”.


  8. Make sure the "Use country and area code" box is unchecked.



  9. Select the "Server Types" tab and make sure the selections are the same as in the window below. Clicking on a box will remove or add a check mark.



  10. Click on the "TCP/IP Settings" button and make sure the selections are the same as in the window below. Then click OK.



  11. Now start your browser and you should get a dialup sign on screen.
    If not:
    - Complete steps 1 and 2.
    - You should see a new icon labeled “East Texas Rural Net”. Double click on it.



  12. Enter your dialup username. Use the username in the box on your account information sheet provided. Username should start with be the same as the primary email address on the account. The format of the username should resemble: myaccount@etxrn.com

  13. Press tab and enter your password.

  14. Click on the box next to “Save Password”.

  15. Now press the “Connect” button.

  16. You should see a dialup dialog window. Your computer will begin the connection process.

  17. Once connected, the dialup connection dialog window will disappear. Look at the bottom right of your screen for two small computers. This means you are connected.

  18. You can now launch your Internet browser. Double click on the browser icon. Samples shown.



  19. To disconnect when done:
    a) Right click on the two computers at the bottom right.
    b) Select disconnect and press the left button.

Place your new dialup icon on your desktop
  1. Double click on My Computer from your desktop.
  2. Double click on Dial-Up Networking.
  3. Right click on the icon labeled East Texas Rural Net.
  4. Click on Create Shortcut.Then click on YES to place the shortcut on your desktop.
  5. Close this window and you should see a new icon your desktop.



  6. [ BACK TO SUPPORT PAGE ]


 
HOME  |  COMPANY  |  DIALUP ACCESS  |  BROADBAND WIRELESS  |  WEBHOSTING  |  SUPPORT  |  CONTACT US  |  EMAIL ACCESS
copyright © 2005. All Rights Reserved. privacy policy | terms & conditions